304 Stainless Steel CIP Cleaning System with Pump, Semi-Auto Pipeline Cleaner
A 304 stainless steel CIP cleaning system with pump and semi-automatic control, built for dairy, beverage, brewery, and liquid food lines. Single to four-tank configurations, electric or steam heating, supply and return pumps, and instrumentation for temperature, flow, pressure, and level. Factory-direct fabrication with engineering support and project-specific sizing.
- Tank Capacity: [100L–5000L or specify actual capacity]
- CIP Types:Single-tank cleaning, two-tank system, three-tank system, four-tank system.
- Material: SUS304 / SUS316L
- Optional configurations: [trolley, mixer, PLC control, manual control]
- Surface Finish: [2B / Brushed / Polished / Mirror Polish]
- If you have drawings, we can process them for you.
Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909
Price range: $6,519.88 through $8,007.72
Guaranteed Safe Checkout
How this CIP skid fits into a process line
A clean-in-place system is four things sized against each other: tank volume, pump curve, heat input, and circuit length. Get those right and cleaning becomes a repeatable 45-minute routine. Get them wrong and operators spend the shift chasing temperature or waiting on a weak return.
This semi-automatic unit circulates heated detergent through lines, vessels, fillers, and heat exchangers at a set flow and temperature, holds it for the contact time your sanitation procedure calls for, then rinses and drains. Operators select the step and confirm valve positions; the pump and heater carry the repeatability.
A typical sequence runs pre-rinse, caustic wash around 70-80 °C, intermediate rinse, an optional acid stage near 55-65 °C, and a final rinse. Your chemical supplier sets concentration and contact time. We size the tank and heater to match, with enough headroom for the coldest shift of the year.
What we can build
Single, two, three, or four-tank layouts. Separate caustic and acid vessels. A hot water tank for sanitizing rinses. Electric element or steam coil heating. Supply pump plus a return pump when the circuit needs the extra pull. Stainless piping, valves, and fittings, with temperature, flow, pressure, and level monitoring. Manual, semi-automatic, or PLC control. Tank capacity, circuit count, and automation level are built to order, and every line item is confirmed against your approved specification before the skid is released to fabrication. Treat the list below as our capability, not as standard equipment on every unit.
Specifications
| Cleaning tank capacity | 200-5,000 L per tank, project-specific |
|---|---|
| Number of tanks | 1 to 4 (caustic, acid, hot water, rinse) |
| Stainless grade | 304 standard; 316L on request |
| Heating | Electric immersion or steam coil / plate |
| Pump flow and pressure | Matched to circuit volume and line velocity |
| Working temperature | Ambient to 90 °C, per detergent spec |
| Control | Manual, semi-automatic, or PLC with HMI |
| Cleaning circuits | Single or multiple, via supply/return headers |
| Power supply | 220/380/415/480 V, 50 or 60 Hz |
| Dimensions | Skid-mounted, laid out to your floor space |
| Customization | Tank volume, circuits, control logic, piping runs |
Where these systems run
Dairy, beverage, brewery, distillery, sauce and liquid food, cosmetic, and pharmaceutical plants all clean the same way in principle: wet the surface, move detergent at velocity, rinse, and drain. What changes is the circuit. A brewery wants fermenter spray balls and a transfer line on separate loops. A dairy runs a plate heat exchanger that needs a higher flow rate than the raw tank. Sauce plants deal with residue that demands a longer pre-rinse. If your product sets up on stainless, say so early, because that changes the tank size and the pump selection.
Questions we get before an order
How much flow do I need? Enough to hold roughly 1.5 m/s in the largest line diameter in the circuit. Send us the pipe schedule and we will calculate it.
Do I need a return pump? Yes when the circuit is long, elevated, or has several branches. Gravity return only works on short, simple loops.
Can I add PLC control later? Usually, if the valve package is specified with that in mind from the start. Retrofitting pneumatics onto a manually valved skid costs more than ordering it correctly.
Getting a quote
Send your industry and product, tank and pipe details (diameters, total length, high points), the cleaning capacity you need per cycle, your heat source, the automation level you want, the stainless grade your QA group requires, and the installation site with any utility or footprint limits. We will come back with a recommended configuration, a drawing, and a price. Custom skids are our normal work, not an exception.
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
