100L Mobile Stainless Steel CIP Cleaning Cart for Material Pipelines
A 100L mobile stainless steel CIP cleaning vehicle for material pipelines and small process loops. We build the tank, pump, heating, and control package to suit your circuit volume, soil type, and automation needs, with 304 or 316L construction and factory-direct engineering support. Send your pipeline details for a configured quote.
- Tank Capacity: [100L–5000L or specify actual capacity]
- CIP Types:Single-tank cleaning, two-tank system, three-tank system, four-tank system.
- Material: SUS304 / SUS316L
- Optional configurations: [trolley, mixer, PLC control, manual control]
- Surface Finish: [2B / Brushed / Polished / Mirror Polish]
- If you have drawings, we can process them for you.
Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909
Price range: $7,045.05 through $9,035.28
Guaranteed Safe Checkout
What a 100L mobile CIP cart is for
Most plants don\’t need a fixed clean-in-place skid for every loop. They need something that can be wheeled to a line, connected to a pipeline or tank circuit, and run through a wash cycle without tearing the process apart. That\’s the job of this unit: a 100L stainless cleaning vehicle that carries the tank, pump, and connections on a single frame.
Production engineers usually come to us after a manual brush-and-bucket routine stops keeping up — the line has to be cleaned and back in service before the next batch, and documentation of the wash cycle matters more than it used to.
How a cleaning cycle runs
Caustic or detergent is drawn from the tank, circulated through the pipeline loop, and returned. Then a rinse, then an acid stage if the soil calls for it. Temperature, flow, and contact time do the actual work; the cart just has to deliver them consistently. On our build, the return pump handles low-pressure recovery while the circulation pump pushes through the circuit.
Choosing tank and flow capacity
Tank volume follows the circuit volume plus the wash solution you want to keep in reserve. A 100L tank often suits short loops — filling heads, transfer lines, small vessels. Long runs or large bore pipe may need 200L or more, and we\’d rather size that up front than sell you a cart that runs dry mid-cycle.
Heating, controls, and monitoring
Electric immersion heating is simpler to install where steam isn\’t available; steam through a heat exchanger heats faster and costs less to run where a boiler is nearby. Control ranges from manual valves to semi-automatic with timers, up to PLC with recipe storage and logged temperature, flow, pressure, and level data.
Technical specifications
| Item | Typical configuration |
|---|---|
| Cleaning tank capacity | 100 L (other volumes on request) |
| Number of tanks | One standard; two or three for caustic/acid/rinse |
| Stainless grade | 304; 316L where chlorides or product contact require |
| Heating | Electric immersion or steam heat exchanger |
| Pump flow and pressure | Matched to circuit resistance; confirmed at order |
| Working temperature | Ambient up to roughly 80 °C |
| Control | Manual, semi-automatic, or PLC |
| Cleaning circuits | Single loop or multiple with changeover |
| Power | Three-phase, voltage per installation site |
| Dimensions | Per general arrangement drawing |
| Custom options | Tank size, circuits, automation, fittings, documentation |
Confirm which of these apply to your order — the list above shows what we can build, not what every cart ships with.
Where these carts get used
Dairy lines, beverage and brewery transfer piping, sauce and liquid food processing, cosmetics batching, and pharmaceutical equipment cleaning. Requirements differ widely by soil type and hygiene program, so we size to your process rather than a generic spec.
FAQ
Can it clean more than one line? Yes, with a changeover manifold; each circuit needs its own flow check.
Is 316L necessary? Not always. It matters with chloride exposure or aggressive acid stages.
Who installs it? Most customers connect it themselves; we supply the piping drawings.
Request a quote
Send us your industry and product, tank and pipeline details, required cleaning capacity, heat source available, automation level, stainless grade, and installation location. Our engineers will recommend a configuration and quote it directly from our factory.
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
