CIP Cleaning System for Tea, Beverage & Milk Production Lines
Factory-direct CIP cleaning systems for tea drinks, beverage, milk and liquid food lines. We build single- or multi-tank skids with stainless piping, electric or steam heating, supply/return pumps and PLC monitoring. Share your tank volume, piping layout and cleaning capacity so we can recommend the right wash cycle and configuration.
- Tank Capacity: [100L–5000L or specify actual capacity]
- CIP Types:Single-tank cleaning, two-tank system, three-tank system, four-tank system.
- Material: SUS304 / SUS316L
- Optional configurations: [trolley, mixer, PLC control, manual control]
- Surface Finish: [2B / Brushed / Polished / Mirror Polish]
- If you have drawings, we can process them for you.
Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909
Price range: $6,998.97 through $8,915.29
Guaranteed Safe Checkout
CIP Systems for Tea, Beverage and Milk Lines
We manufacture CIP cleaning systems for tea drinks, beverage, milk and liquid food lines, plus restaurant and food-shop wash areas. The skid circulates detergent, rinse water and sanitizer through tanks, piping, fillers, mixers and process loops. A correctly sized system gives repeatable cycles and less water and chemical waste than manual wash-down.
A typical cycle runs pre-rinse, alkaline wash, intermediate rinse, acid wash if needed, final rinse and sanitizing. We size pump flow against line volume and return-line pressure drop, not tank volume alone. Dead legs and poor drain slope cause many weak CIP results.
Configuration Options
Available configurations include single-, double-, triple- or multi-tank systems; caustic and acid tanks; hot-water tanks; electric or steam heating; supply and return pumps; stainless piping, valves and fittings; and manual, semi-automatic or PLC control. Tank size, wash circuits and automation can be customized after review. Confirm features for your project before ordering.
| Technical Item | Typical Range |
|---|---|
| Cleaning tank capacity | Custom, typically 100–5,000 L per tank |
| Number of tanks | 1 to 4 or more |
| Stainless grade | 304 or 316L |
| Heating | Electric or steam |
| Pump flow and pressure | Selected for circuit volume and pressure drop |
| Operating temperature | Ambient to 80°C, project-dependent |
| Control | Manual, semi-automatic or PLC |
| Cleaning circuits | Single or multiple loops |
| Power supply | Customer-country specific |
| Dimensions | Skid-mounted, layout-dependent |
| Customization | Tank size, piping, automation and documentation |
Where CIP Fits
Applications include dairy processing, beverage production, breweries, distilleries, sauce manufacturing, liquid food processing, cosmetics and pharmaceutical production. Residue, chemistry, temperature and documentation needs vary, so we match stainless grade, finish and controls to the process.
Buyer Questions
How do I choose tank count? Count wash steps and chemistry changes. Simple rinse-sanitize cycles may use one tank; acid and caustic steps usually need separate tanks.
What determines pump size? Line volume, pipe diameter, return pressure drop and required flow velocity. A piping sketch helps.
Can we add PLC monitoring? Yes. We can quote temperature, flow, pressure and level monitoring with recipe control, depending on scope.
We build factory-direct stainless CIP systems with engineering support for layout, pumps, heat source and controls. Send your industry, processed product, tank and piping details, required cleaning capacity, heat source, automation level, stainless grade and installation location. We will recommend a practical configuration and quote.
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
