5.5KW 304 Tri-Stage Rotor-Stator Heating Jacket High Viscosity Emulsifying Pump
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,590.39 through $1,696.15
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
Ace Mixer builds this 5.5 kW inline high-shear pump for plants that need more than a tank agitator can deliver. The tri-stage rotor-stator set is interchangeable, so you can match shear intensity to the product instead of forcing one geometry across every batch. A 304 stainless body, heating jacket, and PLC controls make the unit practical for high-viscosity emulsions, dispersions, and recirculation loops.
Where it fits in the process
Install it in a pipe run or on a recirculation loop. Product enters the rotor-stator head, gets pulled through tight clearance, and exits as a more uniform stream. That arrangement works well when you want to emulsify oil and water, break down lumps, or fold powders into a liquid without adding a separate batch tank. Compared with batch-only mixing, an inline unit often shortens cycle time and gives operators tighter control over when shear is applied.
Practical features
- Tri-stage rotor-stator: interchangeable stages let you tune shear for emulsification, dispersion, or particle-size reduction; final results still depend on formulation and solids loading.
- Heating jacket: useful for high-viscosity products that need to stay flowable during transfer or recirculation.
- PLC control: stores run parameters for repeatable startups and shift-to-shift consistency.
- 304 stainless construction: suits many food, cosmetic, and chemical service conditions; wetted parts, seals, connections, and motor options can be specified for the duty.
- Optional VFD: lets operators adjust speed as viscosity or flow changes.
Applications
Food and beverage: sauces, dressings, mayonnaise, syrups, liquid flavorings, dairy blends, beverage ingredients, and dispersion of starches, gums, stabilizers, and thickeners. Cosmetics and personal care: creams, lotions, shampoos, conditioners, liquid detergents, and oil-water emulsions. Pharmaceutical: liquid formulations and excipient dispersions where the equipment and materials are suitable. Chemical: coatings, adhesives, aqueous formulations, and compatible emulsions. Not every formula runs in the same configuration; seal material, rotor-stator style, and jacket use need review.
FAQ
Can it run continuously? Yes, in a suitable loop or inline setup. We review flow, viscosity, and discharge pressure before recommending a model.
Do we need a VFD? Many plants choose one for high-viscosity or variable recipes. It helps when product changes during the run.
What should we send for a quote? Batch size, target flow rate, viscosity range, solids content, temperature, available motor power, and local voltage/phase/frequency.
Send those details to Ace Mixer and we will recommend the rotor-stator setup, seals, connections, and motor for your line.
Ace Mixer\’s 5.5 kW inline high-shear emulsifying pump uses a tri-stage rotor-stator, 304 stainless body, heating jacket, and PLC control for high-viscosity emulsions, dispersions, and recirculation loops. It supports powder incorporation, deagglomeration, and repeatable batch consistency. Share batch size, viscosity, flow rate, and electrical specs for a configured quote.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
