Sanitary High-Shear Inline Emulsifying Pump for Dairy & Beverage Processing
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $2,105.46 through $2,265.90
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
Most dairy and beverage plants don\’t set out to buy an inline shear pump. They buy one because a 3,000-gallon tank takes forty minutes to wet out a stabilizer, or because a dressing starts separating two weeks ahead of code date. That is the problem this unit is built around: a close-clearance rotor-stator head that puts shear energy where the powder actually is, instead of hoping an agitator eventually gets there.
How the unit works in a line
Product enters the housing, gets pulled through the rotor-stator gap at high tip speed, and exits as a finer, more uniform dispersion. Mount it in a recirculation loop on an existing tank, or inline between process stages. In most retrofits the pump does the wetting and deagglomeration while the tank agitator handles bulk turnover — a combination that usually beats a bigger agitator alone.
What matters on the floor
- Sanitary construction with smooth wetted surfaces and no dead corners, so CIP actually reaches the seal area and changeover between flavors stays short.
- Stable output across the run — viscosity drift from poorly dispersed gum shows up as fill-weight variation downstream.
- Compact footprint; the skid drops into an existing loop rather than demanding a new room.
- VFD-ready drive where flow needs to track recipe rather than run flat out.
- Motor, seal face, connection style and elastomer options selected against your product, not a catalog default.
Shear-dependent results — droplet size, mouthfeel, gloss — depend on your formulation, solids load and pass count. We won\’t quote a number without a sample discussion.
Where it\’s used
Sauces, dressings, mayonnaise, syrups and liquid flavor concentrates. Dairy blends and beverage bases. Starch, gum and thickener dispersion. Creams, lotions, shampoos and liquid detergents where oil and water need to stay together. Liquid pharmaceutical vehicles and excipient slurries. Waterborne coatings, adhesives and chemical dispersions, provided seal and elastomer selection matches the solvent.
Not every recipe belongs in one pump body. High-solids pastes and low-viscosity emulsions are different builds.
Questions buyers ask us
Can I keep my existing tank? Usually yes. Recirculation loops are the most common install.
How do I size it? Flow rate, viscosity curve, solids content and target particle size drive the head selection.
What about sanitation audits? We supply material certs and finish documentation; tell us your standard.
Lead time? Depends on the drive and seal package — confirm early.
Send us batch size, product viscosity and solids, required motor power and your local voltage and frequency. Our engineers will come back with a configuration and a price rather than a guess.
Ace Mixer\’s sanitary high-shear inline emulsifying pump handles dairy and beverage liquids, dressings, sauces and personal care emulsions. Close-clearance rotor-stator head, dead-corner-free housing for clean CIP, VFD-ready drive and customizable seals, motor and connections. Send us batch size, viscosity and electrical specs for a matched configuration and quote.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
