7.5kW 380V Inline High Shear Emulsifier Pump with VFD Control Box
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,665.28 through $1,781.85
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
7.5 kW Inline High Shear Emulsifier Pump for Shampoo and Liquid Processing
This 7.5 kW high shear three-layer emulsifier pump is built for production lines that need faster wetting, better dispersion, and repeatable emulsions without tying up a batch tank. The rotor-stator head runs at high tip speed inside a compact housing. Product enters, passes through the shear zone, and exits as a more uniform stream. Install it inline on a pipe run or set it up as a recirculation loop on an existing tank. The 380 V, 50 Hz, three-phase motor is paired with a frequency inverter control box, so operators can tune speed to the formula instead of running flat out.
On shampoo, conditioner, lotions, and liquid detergents, the pump helps break down gum and polymer clusters and blend oil and water phases closer to the target droplet size. For sauces, syrups, dairy mixes, and beverage concentrates, it speeds powder wetting and reduces lumps that later clog filters or slow filling. We use stainless-steel contact parts for normal washdown and cleaning routines; seals, connections, and motor options can be changed for different viscosities and CIP needs. A three-layer shear head gives more residence time in the rotor-stator zone, which matters when your product needs a tighter emulsion but your tank has limited agitation.
Do not size the pump from motor kW alone. Flow rate, viscosity, solids loading, discharge pressure, and whether you run batch recirculation or continuous duty all affect the final configuration. Send us your batch size, ingredient list, target particle or droplet size if known, and local voltage. Our engineers will recommend the rotor-stator style, seal arrangement, port connections, and VFD settings for your line, then quote the correct 7.5 kW or alternative model.
Applications
- Shampoos, conditioners, creams, lotions, and liquid detergents
- Sauces, dressings, mayonnaise, syrups, and flavor concentrates
- Dairy blends, beverage ingredients, starches, gums, and stabilizers
- Liquid pharmaceutical dispersions and compatible chemical emulsions
FAQ
Can it run on my existing tank? Yes, as a recirculation loop, provided the pipework, valves, and tank outlet are sized for the pump flow.
Is 7.5 kW enough? It depends on viscosity, flow, and solids. We check duty point before quoting.
Can I change speed during a batch? The inverter control box allows speed adjustment; record settings by formula for consistency.
Ready to specify? Send batch size, material viscosity, desired motor power, and electrical supply to Ace Mixer for a firm recommendation and quote.
7.5 kW inline high shear emulsifier pump with 380 V, 50 Hz three-phase motor and frequency inverter control box. Built for shampoo, creams, sauces, and chemical emulsions, it improves powder wetting, dispersion, and recirculation-loop mixing. Contact Ace Mixer with batch size, viscosity, and electrical details for configuration and quote.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
