5000L Semi-Industrial Stainless Steel Reactor Tank with Agitator - Image 1

5000L Semi-Industrial Stainless Steel Reactor Tank with Agitator - Image 2

5000L Semi-Industrial Stainless Steel Reactor Tank with Agitator

A 5000L semi-industrial stainless steel reactor tank with agitator, built for chemical liquid processing, mixing, heating, and cooling. Shell, jacket, impeller, and seal are sized to your material, viscosity, temperature, and pressure conditions. Send your process details for a configured quotation.

Capacity: 50 liters to 30,000 liters
Mixer power: 1.5 kW to 55 kW
Material: [SUS304 / SUS316L]
Voltage: 110V / 220V / 380V / 400V / 440V / 480V / 600V
Heating method: [Electric / Steam / Thermal Oil / Hot Water / No Heating]
Cooling method: [Cooling Jacket / Dimple Jacket / Coil / No Cooling]
Agitation system: [Top Entry Agitator / Anchor Mixer / Paddle / Turbine / High-Shear Mixer / Customized]
Optional features: [Insulation / Load Cells / Temperature Sensor / Pressure Gauge / Manhole / CIP / PLC Control / Explosion-Proof Motor]
Certificates: ASME, CE, GMP, UL, ATEX, ISO 9001
Working pressure: [Atmospheric / Positive Pressure / Vacuum / Specify pressure]
If you have drawings, we can process them for you.

Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909

Price range: $3,389.10 through $4,164.86

Ask For A Quotation

Guaranteed Safe Checkout

Five thousand liters is the point where a process stops being a lab exercise and becomes a production routine. It is also the size where a reactor has to earn its keep — agitator sizing, heat transfer area, and wall thickness all interact, and a poor match shows up as longer batch times rather than as a drawing error.

What goes into a 5000L reactor

Shell and jacket are rolled from 304 or 316L plate, welded with full-penetration joints on the wetted side, then ground and passivated. Wall thickness follows your design pressure and jacket arrangement instead of a catalog number. A vessel running at atmospheric pressure with a dimple jacket is a different machine from one rated for internal pressure and full vacuum.

Agitation is where most projects need real discussion. Low-viscosity solvents and aqueous solutions run well on a pitched-blade turbine at moderate speed. Slurries, creams, and reaction masses that thicken as they convert usually call for an anchor or helical ribbon running close to the wall, sometimes with scrapers. Motor power, shaft diameter, and impeller geometry are matched to the viscosity range you actually operate in, not to one nameplate figure.

Sealing and temperature control follow the same logic. A single mechanical seal suits most solvent service; packing glands stay an option where maintenance access is tight. Jackets carry steam, hot water, or thermal oil for heating and cooling water for exotherm control. When the jacket alone cannot pull heat out fast enough, internal coils are added.

Where these vessels work

Chemical liquid processing, resin and adhesive production, pharmaceutical intermediates, cosmetic emulsions, food-grade syrups and sauces, and wastewater neutralization. Each application carries its own cleaning expectation, so we ask about CIP, caustic wash, or solvent rinse before settling on surface finish and seal type.

Selection checklist

Material being processed — chemistry, concentration, chloride content
Batch volume and working volume, plus fill and discharge method
Operating and design temperature
Atmospheric, pressurized, or vacuum operation
Viscosity and solids content at the start and end of the batch
Heating, cooling, or isothermal control required
Target mixing result — dissolution, dispersion, suspension, reaction
Cleaning, sealing, and any compliance requirements

Specifications

Nominal volume	5000 L
Material	304 or 316L stainless steel; other grades on request
Inner wall thickness	Set by design pressure and jacket type
Heating	Jacket with steam, hot water, or thermal oil
Cooling	Jacket with cooling water, or internal coil
Working pressure	Atmospheric, vacuum, or pressure — per design
Design temperature	Per process requirement
Agitator	Anchor, paddle, propeller, or turbine
Seal	Mechanical seal or packing gland
Surface finish	2B, mirror polish, or pickling and passivation
Options	Explosion-proof motor, VFD, load cells, CIP spray ball, insulation, PLC control

Questions we get from buyers

Can this run under vacuum? It can, provided wall thickness and jacket design are set for the vacuum level. Give us the figure and we will confirm the shell design.

304 or 316L? 316L for chlorides, acids, and aggressive media; 304 for general aqueous and food service where corrosion risk is low.

Is the agitator included? Yes, sized to your viscosity and mixing target rather than shipped as a generic unit.

Send the material, batch volume, operating temperature, pressure condition, and mixing requirement, and we will come back with a configured unit and quotation. Drawings are available before order for review by your process and safety teams.

We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.

We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.

We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.

We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!

We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.

I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!

I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .

I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!