1000L Industrial Mixing Tank for Syrup Grease Shampoo and Cream

A 1000L mixing tank is typically specified when a process needs controlled blending, repeatable batch volume, and enough working capacity for viscous products. Syrup, grease, shampoo, and cream do not behave the same way, so the tank should be engineered around viscosity, solids content, shear sensitivity, filling level, and cleaning requirements rather than selected by volume alone.

Construction and Materials

We normally review the product chemistry before recommending the wetted material. Stainless steel grades such as 304 or 316L may be considered according to chloride exposure, cleaning chemicals, acidity, and hygiene requirements. Product-contact welds should be continuous and properly finished, with surface polishing specified by the process rather than treated as a cosmetic detail. Gasket material must match the formulation, temperature, and cleaning agents. Sanitary applications may require smooth internal transitions, suitable drainability, and hygienic fittings.

Agitation and Temperature Control

The agitator is selected from actual rheology data. A propeller or pitched-blade impeller may suit lower-viscosity syrup, while an anchor, paddle, or anchor with scraper arrangement is more appropriate for creams and grease. High-speed agitation can improve dispersion, but it may also entrain air or damage shear-sensitive ingredients. Motor and gear reducer sizing depends on viscosity, batch level, impeller diameter, target speed, and starting torque.

If heating is required, the available method may include a jacket or another process-specific arrangement. Temperature control depends on the product, heating medium, operating range, insulation, and whether cooling is also needed. A controller, sensor location, and mixing speed should be coordinated so the measured temperature represents the actual batch.

Typical Applications

• Food and beverage syrup blending
• Industrial grease and lubricant compound preparation
• Shampoo and personal care manufacturing
• Cosmetic cream and lotion processing

Technical Specification Guide

FAQ

Can one agitator handle all four products?
Usually not without compromise. A shared tank may work, but impeller geometry and speed range should be checked for every formulation.

What information should accompany a quote request?
Provide batch size, working level, viscosity, density, temperature, solids, formulation chemistry, cleaning method, mixing time, and any sanitary or hazardous-area requirements.

How do we confirm the correct configuration?
Our engineers use these process details to review material grade, tank geometry, agitator type, motor torque, heating needs, access, discharge, and maintenance clearance before preparing a quotation.