11kW 15HP Pipeline Tri-Stage High Shear Emulsifier Pump
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,537.39 through $1,662.38
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
What this pump actually does on your line
An 11 kW (15 hp) in-line high shear pump with a three-stage rotor-stator stack. Product enters the inlet, is drawn into the first rotor-stator zone, then passes through two more shear stages before leaving the outlet. Each stage is set up differently: the first handles wetting and breaking down lumps, the later stages tighten the dispersion and reduce droplet size. Because the stages sit in series, the material sees multiple shear events in a single pass through the line — which is why one of these units often replaces a batch tank plus a separate homogenizer.
Mounting is usually simple. Flange it into a recirculation loop or a transfer line between your mixing tank and the filler. Wetted parts are 316L stainless steel; the shaft seal is a cartridge mechanical seal, with single, double, and flushed arrangements available. Elastomers in EPDM, FKM, or PTFE-based grades depending on your solvent and CIP regime. A VFD is optional and worth having if you plan to run more than one product family.
Where the tri-stage layout pays off
- Emulsions: oil-in-water and water-in-oil systems where you need a stable, repeatable droplet profile without a long batch cycle.
- Powder incorporation: gums, starches, stabilizers, and thickeners added directly into the loop — the first stage wets them out before they can form fish-eyes.
- Recirculation on existing tanks: retrofits where adding a second vessel is not an option.
Food and beverage plants use these on sauces, dressings, syrups, dairy blends, and beverage concentrates. Cosmetics and personal care run creams, lotions, shampoos, and liquid detergents through them. Pharmaceutical formulators use them for liquid preparations and excipient dispersion, provided the seal and elastomer selection suits the process. Coatings, adhesives, and waterborne chemical dispersions are common too — but check your solvent compatibility against the seal and gasket materials before committing.
Before you request a quote
Three things drive the configuration: flow rate and viscosity at operating temperature, the solids you need to disperse and their typical particle size, and the electrical supply at your site. Tell us those and we will confirm the rotor-stator geometry, motor winding, connection type, and whether a VFD makes sense for your duty cycle.
11 kW (15 hp) in-line high shear emulsifier pump with a three-stage rotor-stator stack. Handles emulsifying, powder dispersion, and agglomerate breakdown in continuous or recirculation loops. 316L stainless wetted parts, cartridge mechanical seal, optional VFD. Built by Ace Mixer for food, cosmetic, pharmaceutical, and chemical processing lines.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
