Three-Stage High Shear Rotor-Stator Emulsifier Pump with On/Off Control
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $2,111.98 through $2,234.26
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
Why the third stage matters
A two-stage head will wet out a gum. It will not always keep that gum from re-agglomerating downstream. Adding a third rotor-stator stage with a tighter clearance gives the product one more pass at high shear before it leaves the housing, and that is where we usually see the difference in shelf stability and in how tight the droplet size spread stays across a batch. The head is built as a single cartridge, so all three stages are inspected or replaced as a set.
Installed where the product already flows
The pump mounts in a recirculation loop or straight into a discharge line, so it works with tanks, pipework and transfer lines you already run. In most plants that removes an open-vessel transfer step and an operator standing at the tank with a hand mixer. Return the product below the liquid surface to avoid aeration. Powder can be inducted on the suction side of the head, which is where most lump problems are either solved or created, depending on how the feed rate is controlled.
Construction and options
- 316L stainless wetted parts; other contact materials quoted on request
- Mechanical seal selection matched to product viscosity and cleaning regime
- ON-OFF push button on the local control box; VFD available for speed control
- Motor, flange (TC clamp, DIN, ANSI) and connections configured per order
Nothing here is universal. A unit sized for 200 cP dressing will not behave the same on a 20,000 cP cream base, and we would rather change the head geometry than sell you a pump that runs at the wrong tip speed.
Typical service
Sauces, dressings, mayonnaise and liquid seasonings. Dairy blends and beverage concentrates. Starch, gum and stabilizer dispersion. Creams, lotions, shampoos and liquid detergents. Aqueous chemical dispersions, coatings and adhesives where the seal and wetted materials suit the formulation. Pharmaceutical and liquid formulation work where the process and equipment configuration are suitable.
Questions we ask before quoting
What flow rate does it handle? Viscosity, head configuration and motor power set that number. Send the target and we size it instead of guessing.
Does it draw powder in by itself? Often yes, with a controlled feed into the suction hopper. Light or hygroscopic powders usually need a small feeder upstream.
Can it run on your local power? Motors are wound to your supply. Tell us voltage, frequency and phase at inquiry.
Get a configuration, not a brochure
Send us batch size in liters, viscosity range in cP, solids loading, any target particle size, required motor power and your local electrical specification. With those five numbers our engineering team can recommend a stage configuration, seal arrangement and connection standard, and return a firm price. Custom motor, seal and contact-material builds are quoted the same way.
Ace Mixer\’s three-stage high shear emulsifier pump mounts inline in a recirculation loop or discharge line. Successive rotor-stator stages wet, disperse and refine the product in one pass, cutting batch time and improving consistency in dressings, creams, chemical dispersions and liquid formulations. Motors, seals and connections configured to your process and local power supply.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
