High Shear Emulsifier Mixer Homogenizer for Cream, Shampoo, Mayonnaise
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,128.01 through $1,211.60
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
A batch mixer sized to the product, not to a catalog page
Formulators usually arrive here after a specific failure. Xanthan gum that gels on contact and leaves fish eyes in the tank. A shampoo base that looks fine in a beaker and goes dull at 500 liters. Mayonnaise that holds for an hour and separates overnight. Each of these points back to shear intensity, head geometry, and how the powder enters the liquid — which is why we configure this batch high shear mixer around your process instead of shipping one fixed build.
Configuration range
- Speed control: optional VFD, adjustable from 0 to 3000 rpm depending on the motor and drive package selected
- Motor power: 1.5 kW to 55 kW, matched to batch viscosity and volume
- Electrical supply: 220V to 480V; voltage, frequency, and phase confirmed against your site before build
- Mixing functions: high shear, dispersion, emulsification, and powder wet-in
- Wetted parts: 304 or 316L stainless steel, with contact materials specified per product chemistry
- Mounting: fixed tank mount or mobile frame with casters for multi-tank rooms
Agitator head design, shaft length, and control level remain open until we see your formulation. A 316L stator with a fine slot pattern behaves very differently from an open dispersing head on the same motor.
Where this unit fits
Food plants run it on sauces, dressings, and gum hydration. Cosmetics and personal care use it for creams, lotions, and shampoo bases. Pharmaceutical and healthcare producers apply it to topical formulations, gels, and suspensions. Chemical processors use it for binder and additive dispersion, and coatings manufacturers for pigment wet-out. The same caveat applies across all of them: head selection, contact material, and running parameters follow from viscosity, solids loading, and the tolerance your product allows.
Common questions
How do I pick between batch and inline? If your product cycles through a holding tank and each batch is a discrete recipe, batch shearing is usually simpler to validate and clean. Continuous throughput favors inline.
Do I need a VFD? It helps when a single unit covers several products at different viscosities. For one fixed recipe at steady volume, a fixed-speed drive is often enough.
Mobile or fixed? Mobile frames suit plants running several tanks per shift. Fixed mounts suit dedicated vessels with a single product family.
Can I add powder under shear? Yes, with the right head and a controlled feed rate. Adding too fast defeats the purpose of the head.
Get a configuration, not a quote sheet
Send us batch volume and vessel dimensions, viscosity range and solids content, target rpm, motor power you expect, head preference, and your local voltage, frequency, and phase. Ace Mixer builds to that information, and we will tell you if a different configuration serves you better.
A configurable batch high shear mixer for emulsifying, dispersing, and powder wet-in. Motor power from 1.5 kW to 55 kW, optional VFD up to 3000 rpm, 304 or 316L wetted parts, and fixed or mobile mounting. Built by Ace Mixer for cosmetic, food, pharmaceutical, and chemical batches, with head and drive selection matched to your viscosity and vessel.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
From placing the order to arranging air freight and finally receiving the equipment, the entire process went smoothly and professionally
Extremely secure home delivery.
We are very happy with our new stainless steel wine tanks from ACE! The tanks arrived safely and were well protected during shipping. The stainless steel finish looks excellent, and the overall quality and workmanship meet our expectations. We also appreciate the professional service and support throughout the ordering and delivery process. Thank you, ACE, for providing reliable winery equipment. We look forward to working with you again!
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
Cip
Batch High Shear Mixers
