Ace Mixer 3-Stage High Shear Emulsifier Homogenizer Pump, Sanitary Inline
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,820.10 through $1,959.88
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
A three-stage rotor-stator stack inside a sanitary pump housing. That\’s the short description. What it actually changes on your line is this: one pass can turn a coarse pre-mix into a much tighter emulsion or dispersion than a jacketed tank with a single-head agitator will produce after an hour of recirculation.
What happens inside the housing
Product enters the inlet and is pulled through three stacked rotor-stator assemblies. The first stage tears apart agglomerates and wets out powder; the second does most of the droplet-size reduction; the third polishes the result. Because mixing and pumping happen in the same body, the unit drops into a recirculation loop on an existing tank or sits inline between process steps. No separate transfer pump, no extra hose runs to break down and clean.
Inline versus batch
For pumpable products, inline processing usually shortens cycle time and reduces air entrainment — the shear energy goes into the product instead of the tank wall. That matters with mayonnaise, cream bases, and stabilizer-thickened sauces, where over-whipping is a real cost.
Build and options
Wetted parts in 316L stainless, sanitary clamp or DIN connections, single or double mechanical seals, motors sized to your viscosity and required flow. VFD control is available when you need to trim tip speed between products. Seals and elastomers are selected against your actual chemistry — solvents and low-pH formulations need different faces than a dairy mix.
Typical service
Food and beverage: dressings, sauces, syrups, dairy blends, gum and starch hydration. Cosmetics and personal care: lotions, creams, shampoo, conditioner, liquid detergent. Pharmaceutical liquid formulations and excipient dispersion where the equipment suits the process. Chemical: coatings, adhesives, waterborne emulsions compatible with the chosen metallurgy and seals.
One pump configuration will not cover every formulation. High-solids products, abrasive slurries, and very high-viscosity pastes each push the design in a different direction.
Before you request a quote
How many stages do I need? Three stages suit most emulsification and fine dispersion work; simpler duties often run fine on two.
What flow rate should I specify? Match it to your recirculation turnover or through-put — undersizing is the most common buying mistake we see.
Can it disperse powders? Yes, with an appropriate inlet arrangement; send us the powder loading and we\’ll confirm.
Send your batch size, product viscosity and solids content, target flow rate, motor power preference, and local voltage and frequency. With those, we can recommend a configuration and quote it.
Ace Mixer\’s three-stage sanitary high shear emulsifier pump combines rotor-stator mixing and pumping in one housing for inline or recirculation processing. Built in 316L stainless steel with selectable seals, connections, and VFD control for food, cosmetic, pharmaceutical, and chemical emulsions.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
