Cosmetic Gel and Body Cream Manufacturing Machine

This cosmetic production machine can be configured for body creams, lotions, gels, and other viscous personal-care products. Vessel capacity, stainless steel grade, agitation, high-shear mixing, heating, cooling, seals, and surface finish depend on the formula and cleaning requirements. Share batch size, viscosity range, process temperatures, and site utilities to help determine a suitable configuration.

Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909

Price range: $7,968.61 through $9,070.67

Ask For A Quotation​

Guaranteed Safe Checkout

Optional agitator
Propeller mixer

Recommend RPM: 0-960RPM
Viscosity: Low/medium viscosity
Application: Mainly Liquid mixing

Paddle mixer

Recommend RPM: 0-200RPM
Viscosity: Low/medium viscosity
Application: Mainly Liquid mixing

Frame Agitator

Recommend RPM: 30RPM
Viscosity: Medium/High viscosity
Application: Melting, High viscosity product mixing, For single wall tank

Scraper agitator

Recommend RPM: 30RPM
Viscosity: Medium/High viscosity
Application: Melting, High viscosity product mixing, For jacket tank

Dispersion mixer

Recommend RPM: 1480/2850 RPM
Viscosity: Low/medium viscosity
Application: Liquid powder mixing and dispersion

Homogenizer

Recommend RPM: 2800 - 3200 RPM
Viscosity: Low/medium/High viscosity
Application: Liquid powder mixing and homogenizing

Magnetic mixer
Magnetic mixer

Recommend RPM: 0-355RPM
Viscosity: Low/medium viscosity
Application: Install at bottom, No mechanical seal working condition

Anchor & Homogenizer combine

Recommend RPM: As above
Viscosity: Low/medium viscosity
Application: Liquid powder mixing and dispersion For tank volume >300L

Product description

Gel and Body Cream Production Equipment

Cosmetic gels and body creams place different demands on a batch vessel. A gel may need controlled powder wetting and hydration to prevent lumps, while a cream typically requires emulsification, heat transfer, and cooling without pulling excess air into the batch. We configure the machine around the formula, batch size, and cleaning process rather than assuming one agitator or vessel design will suit every product.

Vessel, mixing, and temperature design

Product-contact parts are commonly specified in 304 stainless steel; 316 stainless steel may be appropriate when the formula contains corrosive salts, acids, or other ingredients that warrant added chemical resistance. Final selection should follow a review of the complete formulation and cleaning chemicals. Welds in product-contact areas should be continuous, ground smooth, and finished to the agreed hygienic standard, with no crevices that can retain cream or gel. Seal materials also need compatibility checks against oils, fragrances, solvents, and wash temperatures.

Anchor or scraper agitation can keep viscous material moving along the vessel wall. A separate high-shear head may be specified when the process needs finer dispersion or emulsification. Motor and gearbox sizing depend on viscosity across the full batch cycle, working volume, and required mixing speed. Heating may use a jacket with a suitable thermal medium; the choice among hot water, steam, or electric heating depends on available utilities, heat-up time, and temperature sensitivity. Cooling and temperature control should be sized around the actual batch and process sequence.

Configuration details

Item Engineering basis
Capacity Set from batch size, vessel working volume, and headspace needs
Product-contact material 304 or 316 stainless steel, selected for formula compatibility
Agitation Anchor, scraper, high-shear, or combined arrangement as required
Heating and cooling Jacket and controls configured to process and site utilities
Finish and seals Defined by cleaning method, hygiene needs, and ingredient compatibility

Applications and purchasing questions

Typical uses include skin-care creams, lotions, cleansing gels, hair gels, and other personal-care emulsions or viscous products. A frequent specification error is sizing the drive from water-like viscosity rather than the thickest stage of the batch. Another is selecting a high-shear mixer without confirming whether it can be cleaned and accessed safely.

FAQ

Can one machine make both gel and cream? Often, but the agitator arrangement and cleaning requirements must suit both formulas.

What should we send for a quotation? Provide batch and working volumes, ingredient or viscosity range, process temperatures, mixing sequence, cleaning method, available utilities, and installation constraints. These details let our engineers recommend a practical vessel, drive, and heating configuration.

Related Products

Emma Johnson

Customer Review

We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.

Thomas Taylor

Customer Review

We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.

Lauren Martinez

Customer Review

We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.

Amanda Davis

Customer Review

We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!

Robert Wilson

Customer Review

We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.

David Miller

Customer Review

I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!

Michael Johnson

Customer Review

I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .

James Anderson

Customer Review

I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!