6KW 8HP Single Stage High Shear Inline Homogenizer Pump
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,627.02 through $1,711.14
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
A single-stage rotor-stator pump at 6 kW / 8 hp sits in the gap between a batch tank agitator that runs out of shear and a full in-line homogenizing skid the formula cannot justify. The impeller pulls product out of the pipe, accelerates it through the rotor-stator gap, and returns it downstream or back to the tank. One pass or a loop through the vessel applies mechanical shear exactly where it is needed, at the droplet and particle interface.
What it does on a working line
Mounted between two vessels or on a recirculation loop, the pump removes an extra tank, a transfer step, and the air entrainment that comes with open-top mixing. Changeovers get shorter because the wetted path is short and cleanable. The rotor-stator head breaks down agglomerates, wets out powder lumps back into the liquid phase, and drives oil-water emulsification when the phase ratio and residence time support it. Tip speed sets the shear rate, backpressure and flow set how many times the material crosses the shear zone, and both have to be matched to your recipe rather than chosen by motor size alone.
Benefits buyers tend to verify first
- Shorter mix cycles than a comparable batch tank, with fewer manual additions
- More consistent batches, since every portion of product passes the same gap geometry
- Small footprint inside existing piping, no relocation of surrounding equipment
- Optional VFD so one pump can run different products at different tip speeds
- Stainless steel wetted construction, with seals, connections, and motor spec selected to the process
Typical applications
Food and beverage: sauces, dressings, mayonnaise, syrups, liquid seasonings, dairy blends, and dispersion of starches, gums, and stabilizers. Personal care: creams, lotions, shampoos, conditioners, liquid detergents. Pharmaceutical: liquid formulations and excipient dispersions where the configuration suits the duty. Chemical: coatings, adhesives, aqueous preparations, and emulsions compatible with the chosen contact materials. No single pump configuration covers every formulation, so the seal and rotor choices matter as much as the motor rating.
Questions we ask before quoting
How viscous is the product? Rotor-stator geometry and motor load set the practical limit; heavy pastes usually need more power or lower flow rather than a larger head.
Continuous or loop duty? Continuous processing calls for a backpressure valve downstream; loop duty builds shear over time in the tank.
What about the seal? Mechanical seals cover most duties. Abrasive slurries or aggressive solvents may call for a double seal or a flush arrangement.
For a usable recommendation, send batch size, solids loading and viscosity, target droplet or particle range if you have one, required motor power, and local voltage, frequency, and enclosure rating. With those numbers we can match the stage geometry and connections instead of guessing.
Ace Mixer\’s single-stage 6 kW (8 hp) inline high-shear pump handles emulsifying, dispersing, and deagglomerating duties inside an existing pipeline or tank loop. Stainless wetted parts, optional VFD, and configurable seals and connections. Built for sauces, dairy, cosmetics, pharmaceutical liquids, and chemical dispersions. Send batch size and material data for a matched recommendation.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
