300L Stainless Steel Emulsification Reactor with Scraping, Stirring & Electric Heating - Image 1

300L Stainless Steel Emulsification Reactor with Scraping, Stirring & Electric Heating - Image 2

300L Stainless Steel Emulsification Reactor with Scraping, Stirring & Electric Heating

300L stainless steel emulsification reactor with scraped-surface agitation, electric heating, and vacuum capability for pilot and small-batch production in chemical, cosmetic, and food applications.

Capacity: 50 liters to 30,000 liters
Mixer power: 1.5 kW to 55 kW
Material: [SUS304 / SUS316L]
Voltage: 110V / 220V / 380V / 400V / 440V / 480V / 600V
Heating method: [Electric / Steam / Thermal Oil / Hot Water / No Heating]
Cooling method: [Cooling Jacket / Dimple Jacket / Coil / No Cooling]
Agitation system: [Top Entry Agitator / Anchor Mixer / Paddle / Turbine / High-Shear Mixer / Customized]
Optional features: [Insulation / Load Cells / Temperature Sensor / Pressure Gauge / Manhole / CIP / PLC Control / Explosion-Proof Motor]
Certificates: ASME, CE, GMP, UL, ATEX, ISO 9001
Working pressure: [Atmospheric / Positive Pressure / Vacuum / Specify pressure]
If you have drawings, we can process them for you.

Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909

Price range: $3,268.09 through $3,977.59

Ask For A Quotation

Guaranteed Safe Checkout

We build this 300L reactor for production teams that need consistent emulsification under vacuum, with heating, and without teardown headaches between batches. It is a double-layer jacketed vessel, meaning the inner tank holds the product while the jacket carries heat transfer fluid or cooling media. The 300-liter working volume suits pilot-scale runs and small-batch commercial manufacturing.

The vessel is constructed from stainless steel with a scraped-surface agitator. That scraper is not a gimmick—it keeps product film off the heated wall, which matters when you are processing materials that tend to bake on or when heat transfer efficiency drops as a layer builds up. The central stirrer handles bulk mixing, while the scraper continuously wipes the inner surface. For high-viscosity pastes, creams, adhesives, or chemical slurries, this combination is far more effective than a standard anchor or paddle agitator alone.

Electric heating on the jacket gives you precise temperature control without needing a boiler or thermal oil furnace on site. The system can also be configured for cooling if your process generates exothermic heat or requires rapid cooldown before discharge. The vessel is rated for vacuum operation, which helps deaerate products, remove entrapped air, and improve final texture—especially relevant in cosmetics, food, and fine chemical applications.

We pay attention to the details that affect your daily operation: sanitary welds where required, a polished inner surface for cleanability, and a sealing arrangement that holds vacuum without leaking product or drawing in contamination. The discharge valve is positioned for complete draining, and the lid can be configured with additional ports for sensors, solid charging, or liquid feed lines.

Technical Specifications

Item	Detail
Total Capacity	300L (working volume approx. 240–270L depending on process)
Material	Stainless steel (inner tank and jacket; confirm grade per application)
Heating	Electric heating on jacket
Cooling	Jacket cooling (optional configuration)
Pressure	Vacuum operation; confirm design pressure with your process
Agitation	Scraping + central stirring system
Sealing	Mechanical seal or packing—specify based on solvent and vacuum level
Surface Finish	Polished inner surface; external finish optional

What to Specify When You Request a Quote

Before we can recommend the right configuration, we need the following:

Product name and chemical composition (including solvents, acids, or abrasive solids)
Batch size and working volume per batch
Operating temperature and required heating/cooling rate
Working pressure (vacuum level, if any, and whether positive pressure is needed)
Viscosity range and solids content
Required mixing outcome (emulsion droplet size, dispersion uniformity, etc.)
Cleaning method (CIP or manual) and any compliance standards (GMP, FDA, ATEX, etc.)

These details determine the steel grade, wall thickness, agitator design, seal type, and instrumentation we build into your unit. A reactor is not a one-size-fits-all item—it needs to match your process conditions to perform reliably over years of service.

Send us your process parameters and batch requirements. We will respond with a recommended configuration and a quotation based on your actual production needs.

We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.

We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.

We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.

We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!

We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.

I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!

I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .

I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!