Flanged Jacketed Stainless Steel Mixing Reactor for Adhesive Glue Production - Image 1

Flanged Jacketed Stainless Steel Mixing Reactor for Adhesive Glue Production - Image 2

Click to enlarge

Flanged Jacketed Stainless Steel Mixing Reactor for Adhesive Glue Production

Flanged jacketed stainless steel mixing reactor engineered for adhesive glue production. Features 304/316L construction, optional dimple or half-pipe jacket, mechanical seals, and custom agitation. Built for uniform heat transfer, vacuum or pressure service, and easy cleaning. Request a quote with your batch volume and temperature requirements.

Capacity: 50 liters to 30,000 liters
Mixer power: 1.5 kW to 55 kW
Material: [SUS304 / SUS316L]
Voltage: 110V / 220V / 380V / 400V / 440V / 480V / 600V
Heating method: [Electric / Steam / Thermal Oil / Hot Water / No Heating]
Cooling method: [Cooling Jacket / Dimple Jacket / Coil / No Cooling]
Agitation system: [Top Entry Agitator / Anchor Mixer / Paddle / Turbine / High-Shear Mixer / Customized]
Optional features: [Insulation / Load Cells / Temperature Sensor / Pressure Gauge / Manhole / CIP / PLC Control / Explosion-Proof Motor]
Certificates: ASME, CE, GMP, UL, ATEX, ISO 9001
Working pressure: [Atmospheric / Positive Pressure / Vacuum / Specify pressure]
If you have drawings, we can process them for you.

Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909

Price range: $3,441.79 through $4,407.90

Ask For A Quotation

Guaranteed Safe Checkout

Adhesive production puts real demands on mixing equipment. The batch has to stay at temperature, the agitator has to handle viscosity shifts, and the vessel needs to hold pressure without leaking. This flanged jacketed stainless steel reactor is built for that kind of service.

We fabricate the vessel from 304 or 316L stainless steel, depending on your formulation chemistry. The jacket is dimple or half-pipe type, or a full jacket, selected by your heating and cooling requirements. In adhesive glue processes, you typically need uniform heat transfer to control viscosity and prevent scorching near the wall. The flange design gives you a removable top for cleaning and maintenance, which matters when you switch between adhesive formulas.

Weld seams are fully penetrated and passivated. Interior surfaces can be electropolished to Ra ≤ 0.4 µm if required. The shaft seal is a mechanical seal rated for vacuum or pressure service; we can also fit a double mechanical seal with barrier fluid for solvent-based adhesives.

Agitator choice depends on your material. Low viscosity glue can use a standard anchor or turbine, while high viscosity products benefit from a heavy-duty anchor with scraped wall blades. We match the gearbox and motor to your torque needs, not just the tank size.

Technical Specifications

Attribute	Value
Capacity	Custom from lab to production scale
Material	304 or 316L stainless steel
Jacket	Dimple, half-pipe, or full jacket
Working pressure	As specified by process
Design temperature	As specified by process
Mixing agitation	Anchor, turbine, or scraped-wall
Shaft seal	Single or double mechanical seal
Surface finish	Ra ≤ 0.8 µm standard; electropolish available

Frequently Asked Questions

What stainless steel grade is recommended?

For most adhesives, 316L offers better corrosion resistance with acidic or chloride-containing formulations. 304 is acceptable for neutral water-based systems.

Can this reactor handle vacuum?

Yes. We design the head and flanged joint for full vacuum or internal pressure up to your specified rating. Confirm the working pressure when requesting a quote.

How is the jacket heated?

Common options include steam, hot oil, or water circulation. We size the jacket area and nozzle connections to match your utility supply and required heat-up rate.

What about cleaning?

Manual cleaning via the manway works for many sites, but spray balls or CIP nozzles can be added for automated washdown.

Quick view

Add to wishlist

10 m³ Low Alloy Steel Biodiesel Reactor – Jacketed, Motor-Driven Pressure Vessel

We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.

We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.

We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.

We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!

We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.

I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!

I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .

I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!