5.5KW Three Stage High Shear Inline Homogenizer Emulsion Pump
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $1,592.13 through $1,677.47
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
A 5.5 kW (7.5 HP) three-stage high shear pump tends to show up on lines where the batch tank is already maxed out and the product still isn\’t where it should be. Material enters the housing, passes three rotor-stator stages, and exits the other side. The gear drive spins the rotor and moves product through at the same time, so in most layouts you don\’t need a separate transfer pump behind it.
Each stage tightens the gap, so shear climbs as the material travels. Droplets and agglomerates come apart progressively rather than in one hit. Whether you reach a specific particle size depends on your formulation, solids loading and flow rate, which is why we size the rotor stack and operating speed to your numbers instead of quoting a fixed result.
What it changes on the floor
- Mounts inline on pipe or a recirculation loop — no extra tank, no second pump
- Recirculate until spec is met instead of guessing at agitator time; batch cycles get shorter
- Powder wetting and deagglomeration happen in the liquid stream, so fewer fish eyes and lumps carry into the finished batch
- Repeatable oil-in-water emulsions from run to run, which matters more than a single good batch
- Stainless wetted parts, mechanical seal options, VFD available when your recipe needs speed changes mid-run
Typical service
Food and beverage: sauces, dressings, mayonnaise, syrups, liquid flavorings, dairy blends, starch and gum hydration. Personal care: creams, lotions, shampoo, conditioner, liquid detergent. Pharmaceutical: liquid formulations and excipient dispersion where the pump and seal materials suit the process. Chemical: coatings, adhesives, waterborne emulsions and dispersions compatible with the selected elastomers.
Questions buyers usually ask
Continuous or batch? Both. Continuous fits once the recipe is locked; recirculation over a tank is more common during development and for high-solids work.
Will it handle our viscosity? Tell us the range and the solids content. Above a certain point the pump needs to be sized up or fed differently, and it\’s better to know that before the order.
What drives the price? Motor, seal type, contact material and connection standard. A sanitary clamp build and a flanged carbon-steel-line build are not the same machine.
Send us your batch size, material characteristics, target motor power and local electrical spec — 460 V/60 Hz, 380–415 V/50 Hz, or whatever your plant runs. We\’ll recommend a configuration and quote it.
Ace Mixer\’s 5.5 kW three-stage inline high shear homogenizer handles emulsifying, dispersing and powder wetting directly in the pipe. Gear-driven rotor-stator design, stainless construction, VFD and seal options available for food, cosmetic, pharma and chemical processing.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
