Stainless Steel Cosmetic Mixing Tank Reactor Electric Heating Magnetic Stirrer

Jacketed stainless steel mixing tank reactor with electric heating and magnetic-drive agitation, built for cosmetic emulsions, creams, and chemical batches. 304 or 316L wetted parts, polished interior, optional homogenizer. Share your material, batch volume, temperature, pressure, and mixing needs for a configured quote.

Note: Please contact our sales team before placing an order. Website prices are for reference only; specific pricing requires understanding your requirements to provide a quote.
Email:info@ace-chn.com
Tel: +86 186 2683 5909
WeChat: ace-chn
WhatsApp: +86 186 2683 5909

Price range: $3,763.26 through $4,687.14

Ask For A Quotation​

Guaranteed Safe Checkout

Optional agitator
Propeller mixer

Recommend RPM: 0-960RPM
Viscosity: Low/medium viscosity
Application: Mainly Liquid mixing

Paddle mixer

Recommend RPM: 0-200RPM
Viscosity: Low/medium viscosity
Application: Mainly Liquid mixing

Frame Agitator

Recommend RPM: 30RPM
Viscosity: Medium/High viscosity
Application: Melting, High viscosity product mixing, For single wall tank

Scraper agitator

Recommend RPM: 30RPM
Viscosity: Medium/High viscosity
Application: Melting, High viscosity product mixing, For jacket tank

Dispersion mixer

Recommend RPM: 1480/2850 RPM
Viscosity: Low/medium viscosity
Application: Liquid powder mixing and dispersion

Homogenizer

Recommend RPM: 2800 - 3200 RPM
Viscosity: Low/medium/High viscosity
Application: Liquid powder mixing and homogenizing

Magnetic mixer
Magnetic mixer

Recommend RPM: 0-355RPM
Viscosity: Low/medium viscosity
Application: Install at bottom, No mechanical seal working condition

Anchor & Homogenizer combine

Recommend RPM: As above
Viscosity: Low/medium viscosity
Application: Liquid powder mixing and dispersion For tank volume >300L

Product description

This is a jacketed stainless steel mixing tank with electric heating and a magnetic-drive agitator, built for cosmetic emulsions, creams, and low- to medium-viscosity chemical batches. We build it as a reactor rather than a holding tank, because the same unit often has to heat, disperse, emulsify, and cool in one cycle.

Wetted parts are 304 or 316L. The grade follows the product: 316L for acidic, salty, or chloride-bearing formulations, 304 for most neutral cosmetic bases at lower cost. Inner wall thickness is calculated from design pressure and tank diameter, so we do not fix it in advance. Welds are ground flush and the interior polished to an Ra agreed with the customer, commonly 0.4–0.8 µm where residue matters.

Electric heating runs immersion elements in a thermal oil or water jacket, which removes the need for a site steam boiler and gives tight temperature control. Cooling uses the jacket circuit or an internal coil. The magnetic stirring system keeps a rotating seal out of the product path: the impeller is driven through a magnetic coupling, so there is no shaft seal to leak and no lubricant contact with the batch. Anchor, paddle, and high-shear homogenizer heads are available, depending on whether the job is bulk blending or droplet-size reduction.

Typical installations

Cosmetic and personal care emulsions, pharmaceutical ointment bases, food sauces and syrups, and general chemical blending where a sanitary, heatable, seal-free vessel is required.

Specifications

Parameter Details
Capacity Set by batch size; working volume confirmed at order
Material 304 or 316L stainless steel, wetted parts
Inner wall thickness Calculated from design pressure and diameter
Heating Electric immersion elements in oil or water jacket
Cooling Jacket circuit or internal coil
Working pressure Atmospheric, pressurized, or vacuum — stated by customer
Design temperature Defined per process; controls matched to it
Agitation Magnetic-drive stirrer; anchor, paddle, or homogenizer
Seal Magnetic coupling, no dynamic shaft seal in the product
Surface finish Interior polished to agreed Ra; exterior options available

What to check before ordering

  • Material to be processed, its chemistry, and concentration
  • Batch and working volume
  • Operating and design temperature
  • Atmospheric, pressurized, or vacuum duty
  • Viscosity and solids content
  • Whether heating, cooling, or both are needed
  • Mixing target — blend, suspend, or emulsify
  • Cleaning, sealing, and any compliance requirements

FAQ

Can the tank run under vacuum? Yes, but shell thickness, head style, and agitator support change with the vacuum level, so tell us the figure.

How do I pick between 304 and 316L? Look at chloride exposure and cleaning chemicals. When in doubt, 316L is the safer wetted surface.

Is the magnetic drive suitable for high viscosity? It suits low to medium viscosity well. Heavy pastes usually call for a top-entry mechanical agitator instead.

Send us the material, batch capacity, operating temperature, pressure requirement, and mixing goal, and our engineers will propose a configuration and quote the vessel accordingly.

Emma Johnson

Customer Review

We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.

Thomas Taylor

Customer Review

We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.

Lauren Martinez

Customer Review

We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.

Amanda Davis

Customer Review

We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!

Robert Wilson

Customer Review

We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.

David Miller

Customer Review

I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!

Michael Johnson

Customer Review

I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .

James Anderson

Customer Review

I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!