Mobile Lift High Shear Mixer Homogenizer for Shampoo & Carbomer Gels
- Material: 304 or 316L
- Voltage: 110V 208V 220V 380V 400V 415V 480V 600V
- Certificates: CE, GMP, UL, ATEX, ISO 9001
- Power：0.75KW-55KW （1 HP – 74 HP）
- Motor brands: ABB, Chinese brands, SEW, Siemens (optional)
- 1-year free warranty with door-to-door delivery.
- Optional: Variable-frequency drive, control panel
- MADE IN CHINA
- We have it in stock.
Please contact our sales team before placing your order.
Email:info@ace-chn.com
Tel:+86 18626835909
WeChat: ace-chn
Price range: $2,341.50 through $3,533.75
Guaranteed Safe Checkout
We manufacture and sell the following types of mixers
Mix, emulsify, homogenize, disintegrate and dissolve
Ideal for disintegrating solids and incorporating powders
Reduce mixing times by up to 80%
Reduce mixing times by up to 90%
Quickly disperse and hydrate powders, even at higher viscosities
Easy to move and lift
Features heating, cooling, vacuum, and other functions
Recommended RPM: 1480/2850 RPM
Where carbomer batches usually go wrong
Most lumpy gels we get called about start the same way: powder goes into the tank and the impeller sits too high or too low to pull it under. A lift-mounted head changes that. The operator drops the rotor into the vortex, adds carbomer at the shoulder of the swirl, and the batch disperses instead of blooming into fish eyes.
What the mobile frame buys you
The unit rides on casters and can be wheeled between kettles, drums, or a mixing bay, provided the floor and aisle layout allow it. High-volume lines and permanent tank farms often do better with the fixed version — same head geometry, no cart.
Configuration range
- Motor: 1.5 kW to 11 kW, sized to batch volume and viscosity
- Speed: VFD-controlled, 0–3000 rpm depending on motor and head selection
- Electrical: 220–480 V; voltage, frequency, and phase confirmed for the destination market
- Wetted parts: stainless steel, grade and surface finish matched to the product
- Functions: high shear, dispersion, emulsification, powder incorporation into liquids
Sizing decisions that matter
Start with batch size and vessel diameter — a head that suits a 200 L kettle will not sweep a 2,000 L tank. Then look at viscosity and solids load, because a shampoo base and a carbomer gel at the same volume need different torque. Speed and motor power follow from there. Confirm your local supply first: 380 V/50 Hz three-phase and 480 V/60 Hz three-phase call for different windings, and getting this wrong delays commissioning more often than any mechanical issue.
Head design is the last variable and the one buyers most often skip. A slotted dispersing head handles powders; a toothed rotor-stator suits emulsification. Tell us which you need and we specify accordingly, including the wetted material grade.
Typical duty
Cosmetic and personal care batches (shampoo, shower gel, creams), pharmaceutical and healthcare preparations, food and beverage mixes, chemical processing, and compatible coatings. The right head, material, and operating parameters always depend on the product\’s viscosity, ingredients, and process requirements.
Questions we hear
Can one unit serve several tanks? Yes, if the vessel heights fall within the lift travel and the casters can reach them.
Do you supply explosion-proof builds? Tell us the classification your site requires and we will confirm what is available. We do not assume it.
How is cleaning handled? Wetted surfaces are polished stainless; the head dismantles for manual cleaning. Product contact finish is specified at order.
What lead time should we plan for? It depends on configuration. Custom voltage and control packages add time.
Getting a quote
Send us batch volume, vessel dimensions, product viscosity, target rpm, required motor power, and your local electrical specification. With those five points we can recommend a configuration instead of guessing.
A mobile lift type batch high shear mixer homogenizer for shampoo, shower gel, and carbomer dispersion. VFD speed control, 1.5–11 kW motors, 220–480 V options, and stainless steel wetted parts, configured by Ace Mixer to your batch size, viscosity, and electrical supply.
Single-stage in-line mixer
Three-stage in-line mixer
High-Shear Mixer with lift
High shear mixer
We ordered a complete peanut butter processing line, and overall we’ve been very happy with it. The equipment arrived well packed and everything was installed and tested without major issues. The line runs smoothly, and the mixing and processing have been consistent. Our peanut butter comes out with a good texture, and the equipment is not difficult for our operators to use and clean. The support from the supplier was also helpful during setup. So far, it has been a good investment for our production.
We’ve been using this mixing tank for our chocolate production and so far it has worked really well. The mixing is consistent, temperature control is good, and it’s easy to clean. Our operators have had no issues using it. Overall, we’re very happy with the tank.
We’ve been using these mixing tanks for our production for several years. Every year, we usually add a few more tanks as our business grows, and the quality has always been very good. The tanks have been reliable and have worked well for our daily production. We’ve had a good experience with the equipment and the service, so we’ve continued coming back for more.
We ordered 2 mobile storage tanks and 2 mobile powder tanks for our production. Everything arrived in good condition and was packed well. The tanks are solid and easy to move around, which is really convenient for our daily work. The powder tanks have also been working well for storing and handling our ingredients. Overall, we’re very happy with the equipment and the service. Thanks for the great support!
We purchased a mixing tank for our ice cream production, and we are very satisfied with the equipment. The tank is well built, easy to operate, and works smoothly with our ice cream mix. The heating and mixing performance has been very consistent, which has helped us improve our production process. The equipment arrived in good condition and was well packaged. Overall, we are very happy with the quality and service.
I ordered 8 jacketed mixing tanks and was very happy with the experience. The tanks arrived quickly and were very well packed. I checked all 8 units after delivery and there was no damage at all. Everything arrived in good condition. Thanks for the fast shipping and great service!
I worked closely with polly to develop our custom mixing tanks. All in all, very professional and responsive. we are happy to have them as our trusted supplier for all of our mixing equipments .
I am very happy with the product I bought, the quality exceeded expectations and the experience was great. Special thanks for the after-sales service provided by your company. The customer service staff was very kind and handled queries quickly and professionally. And provide detailed operation guidance, to solve my questions. The whole service process made me feel very reassured and considerate, which made me more trust in the brand. In the future, if there is a need, I will certainly continue to buy, and I will recommend it to friends around me. Thank you for your company and look forward to more cooperation!
